| Customization: | Available |
|---|---|
| Output Type: | AC Three Phase |
| Gas Source: | Gas |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Technical Specification of Gasification Power Generation System | |||||||||
| Model | 50GF | 100GF | 200GF | 300GF | 400GF | 500GF | 600GF | 800GF | 1000GF |
| Rated Power(KW) | 50 | 100 | 200 | 300 | 400 | 500 | 600 | 800 | 1000 |
| Rated Frequency | 50/60HZ | ||||||||
| Rated Voltage(V) | 220/400/440/6300/6600/11000/13800 | ||||||||
| Model of Gasifier | LHC50 | LHC100 | LHC200 | LHC300 | LHC400 | LHC500 | LHC600 | LHC800 | LHC1000 |
| Gasifier Type | Fluid Bed Gasifier /Fixed Bed Gasifier | ||||||||
| Biomass Moisture Requirement |
≤20%(Wet Basis) | ||||||||
| Biomass Size equirement |
Diameter 20mm-80mm; Length 10mm-80mm | ||||||||
| Biomass Consumption(Kg/Hr) |
50-100 | 100-200 | 200-400 | 300-600 | 400-800 | 500-1000 | 600-1200 | 800-1600 | 1000-2000 |
| Gas Production(Nm³/h) | 125-150 | 250-300 | 500-600 | 750-900 | 1000-1200 | 1250-1500 | 1500-1800 | 2000-2400 | 2500-3000 |
| Ash Discharge Type | Dry Ash Type/Wet Ash Type | ||||||||
| Type of Gas Purification | Dry Type Gas Purification System/Wet Type Gas Purification System | ||||||||
| Heat Value of Gas | ≥1000Kcal/Nm³ | ||||||||
| Gas Composition | CO 15-20% CO2 8-12% CH4 Up to 3% H2 15-20% N2 45-50% | ||||||||
| Model of Genset | 50GF | 100GF | 200GF | 300GF | 400GF | 500GF | 600GF | 400GF | 500GF |
| Qty of Genset | 1 Set | 1 Set | 1 Set | 1 Set | 1 Set | 1 Set | 1 Set | 2 Sets | 2 Sets |
|
Customer Benefits for Syngas-Biomass Engines
|
|
• Cylinders Structure in Line & Upright & Concise Layout, which means simple, easy and low cost in operation & maintenance. Engine-Overhaul can be handled at user's site.
|
|
• Large cylinder (300mm), long stroke, low speed and big displacement 215L and 242L, which means big reserve power capacity and constant power output.
|
|
• Low engine speed at 500 or 600rpm, which means high reliability for continuous operation, sufficient combustion, low exhaust gas temperature and high heat efficiency.
|
|
• Naturally aspirated (no turbocharger and Intercooler), which means low failure rate and minimum downtime (TAR in syngas always block and damage turbocharger and intercooler).
|
|
• Internal mixing system (for high hydrogen gas over 15%), gas and air intake separately, then mixed in combustion room, which means no risk of backfire and cylinder knocking.
|
|
• Strong treatment and resistance ability against TAR, long term trouble free operation. TAR always raises problems of
pipeline-blocking, cylinder-pollution and spark plug-jamming etc.
|
|
• Compressed Air Starting System, smooth starting, high success rate and easy for maintenance.
|
|
• Open Cooling System, adopting plate-type heat exchanger, high efficiency and easy for scale-removal.
|
|
• Dismountable intake-valve-box, which means can clean TAR easily and conveniently (no need disassembling of cylinder head).
|
|
• Low-speed engine makes the noise lower. The maximum noise ≤100dB. Through silencer, the noise will be ≤70dB.
|
|
• Low speed means low components wearing, namely lower cost in spare parts replacement and long life span.
|
|
• Long Overhaul Time of 60,000 hours and lifecycle of 20-25 years, which ensure sustainable financial rewards of power plant.
|
|
Applicable Gas Fuels
• Biomass from MSW, Woodchips, Sawdust, Straw, Rice husks, Nut-shells, and Chicken manure etc.
• Industrial tail gas & refinery gas, such as coal gas, coking gas, semi-coke gas, coke oven gas, oilshell tail gas, carbide tail gas, ferrochromium tail gas, yellow phosphorus tail gas, producer gas and paralysis gas etc.
|
|
Requirements for Syngas-Biomass Quality
|
|
Before entering into engine, the syngas should be treated with dust-removal, tar-removal, desulfurization, dewatering and cooling process, to meet up following requirements:
|
|
• Heat value≥4MJ/Nm3;
|
|
• Gas temperature≤40°C;
|
|
• Gas pressure 2.5~10kpa (3~5kpa is better), pressure change rate≤1kPa/min;
|
|
• Moisture Content ≤40 g/Nm3 (without free water);
|
|
• Impurity content≤30mg/Nm3, Impurities particle size≤5μm;
|
|
• Tar content≤50mg/Nm3, H2S content≤50mg/Nm3, Total Sulfur content ≤100mg/Nm3;
|
|
• Ammonia content≤20mg/Nm3, Chlorine content ≤50mg/Nm3
|
|
• Hydrogen volume content≤50%, Oxygen volume content≤1%;
|
|
• The capacity of syngas pressure-buffering tank should match well with the generator's gas consumption.
|
){kind=link}