10kw-5000kw Biomass/Syngas/Natural Gas/Biogas/Methane Gas Generator Set
Applicable Fuels of Natural Gas Scope
Methane Based Gas, mainly including natural gas (CNG, LNG, PNG), Oilfield Assoicated Gas, Coalmine Gas, Coalbed Gas, Coal Well Gas, Shales Gas and so on
• Compressed natural gas: CNG is methane stored under high pressure in a gaseous form, making it lighter than air. It is safer than gasoline and diesel because it's nontoxic, and disperses quickly.
• Liquefied natural gas: LNG is methane cryogenically cooled to a liquid form, reducing its volume for ease in storage and transport. LNG provides fleet managers with the ability to store more fuel with less tank weight, thus creating an efficient and cost-saving fueling solution for heavy-duty trucking, marine, and rail fleets.
• Oilfield Gas: other named associated petroleum gas (APG), or associated gas, is a form of natural gas which is found with deposits of petroleum, either dissolved in the oil or as a free "gas cap" above the oil in the reservoir.
• Coalbed methane gas: coal-bed methane (CBM), coalbed gas, coal seam gas or coal-mine methane, is a form of natural gas extracted from coal beds. In recent decades it has become an important source of energy in United States, Canada, Australia, and other countries.
• Shale Gas: shale gas a kind of natural gas that is found trapped within shale formations.Shale gas has become an increasingly important source of natural gas in the United States since the start of this century, and interest has spread to potential gas shales in the rest of the world. In 2000 shale gas provided only 1% of U.S. natural gas production; by 2010 it was over 20% and the U.S. government's Energy Information Administration predicts that by 2035, 46% of the United States' natural gas supply will come from shale gas.
Requirements for Natural Gas Quality
Normally speaking, require your gas can reach below standards:
• The content of CH4 ≥70%
• Gas Pressure: 2.5~10kpa, rate of pressure change ≤1kpa/min
• H2S≤20mg/Nm3
• Total Sulfur Content 460mg/Nm3
• Dust Content ≤10mg/Nm3
• No Liquid Water, Moisture Content≤40g/Nm3
• Impurity particular≤5um, Impurity content ≤30mg/Nm3
Main Technical Datasheet
|
Item |
Technical specification |
Engine |
Model |
6300D/Z |
6300D/Z-1 |
8300D/Z-1 |
8300D/Z-2 |
8300ZLD/Z-1 |
9300ZLD/Z |
9300ZLD/Z-1 |
Type |
Inline, water cooled, four stroke, spark plug ignition |
Non-turbocharged |
Turbocharged, inter-cooled |
Cylinder number |
6 |
8 |
9 |
Cylinder diameter (mm) |
300 |
Rated speed(r/min) |
500 |
600 |
500 |
600 |
600 |
600 |
600 |
Rated power (kW) |
450 |
550 |
660 |
770 |
1100 |
1320 |
1650 |
Rated thermal consumption(MJ/kW·h) |
≤10.5 |
Rotate direction (From flywheel) |
Clockwise |
Start mode |
Compressed air /motor start |
Compressed air start |
Exhaust temperature (ºC) |
≤600 |
≤650 |
Oil consumption(g/kW·h) |
≤0.8 |
≤1.0 |
Generator set |
Type |
400GFZ |
500GFZ |
600GFZ |
700GFZ |
1000GFZ |
1200GFZ |
1500GFZ |
Rated power(kW) |
400 |
500 |
600 |
700 |
1000 |
1200 |
1500 |
Frequency(HZ) |
50 |
Voltage(V) |
400/6300/10500 |
Current(A) |
722/46/28 |
902/57/34 |
1083/69/41 |
1263/80/48 |
1804/115/69 |
2165/137/82 |
2710/172/103 |
Power factor (COSΦ) |
0.8 (Lagging) |
Phase and connecting |
3phases 4wires/3phases 3wires |
Dimension (L×W×H)(mm) |
5800×1600×2900 |
6400×1600×2900 |
6400×1600×3100 |
8500×1900×3700 |
8500×1900×3700 |
Weight(kg) |
18000 |
22000 |
25000 |
42000 |
42000 |
Natural Gas Generator Technical Features
ØLarge cylinder, ensure stable and constant power output
Large cylinder, long stroke, low speed and big power reserves, ensure stable and constant power output.
ØLow speed ensure service life
Low &medium speed reduces components wear, extends service life, reduces components inventory and improve economic benefit.
ØNaturally aspirated
Naturally aspirated, low gas intake pressure requirement (gas pressure ≥2kPa), strong adaptability to gas pressure fluctuation.
ØTargeted designed & High adaptability
For biogas containing H2S, main components are under special treatment, enhance corrosion resistance; for high CO2content in biogas, air-fuel ratio and ignition system are optimized, enhance unit adaptability.
Typical Projects of Natural Gas Engine Power Plant
![10kw-5000kw Biomass/Syngas/Natural Gas/Biogas/Methane Gas Generator Set](//www.micstatic.com/athena/img/transparent.png)
![10kw-5000kw Biomass/Syngas/Natural Gas/Biogas/Methane Gas Generator Set](//www.micstatic.com/athena/img/transparent.png)
![10kw-5000kw Biomass/Syngas/Natural Gas/Biogas/Methane Gas Generator Set](//www.micstatic.com/athena/img/transparent.png)
Why Zichai Gas Generator Set
1.Development and manufacturing internal combustion engine since 1970
2. Factory area over 330000m2 & over 2200 employees
3. Highly versatile power generator with ability to handle more than 20 different gases
4. More than 200 employees dedicated to developing and improving power generator for various gas.
5. More than 1000 systems installed in over 20 countries using a variety of gases.
6. More than 50 people in the Customer Service Department making the Organization very Customer Responsive.
![10kw-5000kw Biomass/Syngas/Natural Gas/Biogas/Methane Gas Generator Set](//www.micstatic.com/athena/img/transparent.png)
FAQ
1.Are you a trading company or manufacture?
Manufacture with factory.
2.What kinds of gas generator set do you produce?
It covers for all kinds of gas produced in agriculture and industry, including biomass gas, biogas, natural gas, coal mine gas, coke oven gas, semi-coke gas and syngas, as well as related gas produce equipment.
3.What is your delivery time?
Normally within 60days, it depends on the configuration and quantity, please confirm with us before order.
4.What is your payment terms?
T/T or L/C.
5.How do you pack products?
Standard export packaging. Equipment packing with plastic bag, and with new solid wooden box, suitable for long-distance sea transportation, moisture-proof, earthquake, rust-proof and anti-brutal handling.
6.What is your available port of shipment?
Normally Qingdao port, other ports available according to customers' requirement